# 3d printer enclosure file?

**URL:** <https://discuss.blues.com/t/3d-printer-enclosure-file/1173>\
**Category:** Uncategorized\
**Created:** [January 11, 2023, 7:31pm UTC](https://discuss.blues.com/t/3d-printer-enclosure-file/1173 "2023-01-11T19:31:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jlutzwpi](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/jlutzwpi/32/631_2.png) [@jlutzwpi](https://discuss.blues.com/u/jlutzwpi)\
**Post date:** [January 11, 2023, 7:31pm UTC](https://discuss.blues.com/t/3d-printer-enclosure-file/1173/1 "2023-01-11T19:31:47Z")

</div>

Hi all, I tried search the forums and didn’t see anything…is there a design for an enclosure for the Notecarriers? (specifically look for Notecarrier F). I have 0 experience with 3D design so was wondering if I could grab something “off the shelf” that I could send to my library’s 3D printer.

thanks!  
Justin

---

<div class="post-metadata">

**Author:** ![tonyweil](https://avatars.discourse-cdn.com/v4/letter/t/ec9cab/32.png) [@tonyweil](https://discuss.blues.com/u/tonyweil)\
**Post date:** [January 22, 2023, 6:24pm UTC](https://discuss.blues.com/t/3d-printer-enclosure-file/1173/2 "2023-01-22T18:24:51Z")

</div>

Here is a 3D printable enclosure and snap fit lid for the Blues Notecard-F I made for a project… There is only 1 hole on the front for a USB cable to program an installed ESP32. There are standoffs built inside the box so you can mount a Lipo battery under the Notecard. There is also room at each end and on the sides for the flexible antenna that comes with the Notecard.

Just send the 2 STL files to whoever is going to print it for you.

> **[GitHub - tonylweil/Notecard-F-ESP32\_Enclosure](https://github.com/tonylweil/Notecard-F-ESP32_Enclosure)**
>
> Contribute to tonylweil/Notecard-F-ESP32\_Enclosure development by creating an account on GitHub.

 ![Notecard-front](https://us1.discourse-cdn.com/flex020/uploads/blues/original/1X/3abfe1d5926e3f39a48b4042193c54697075d661.jpeg)  
 ![Notecard-open](https://us1.discourse-cdn.com/flex020/uploads/blues/original/1X/963197b33f5b677f59f7241e58804947eba19029.jpeg)

---

<div class="post-metadata">

**Author:** ![jlutzwpi](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/jlutzwpi/32/631_2.png) [@jlutzwpi](https://discuss.blues.com/u/jlutzwpi)\
**Post date:** [January 23, 2023, 7:01pm UTC](https://discuss.blues.com/t/3d-printer-enclosure-file/1173/3 "2023-01-23T19:01:40Z")

</div>

Excellent, thank you very much!!!