# Bypass notecard edge connector?

**URL:** <https://discuss.blues.com/t/bypass-notecard-edge-connector/581>\
**Category:** Hardware\
**Created:** [December 30, 2021, 1:47am UTC](https://discuss.blues.com/t/bypass-notecard-edge-connector/581 "2021-12-30T01:47:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![tavis](https://avatars.discourse-cdn.com/v4/letter/t/9de0a6/32.png) [@tavis](https://discuss.blues.com/u/tavis)\
**Post date:** [December 30, 2021, 1:47am UTC](https://discuss.blues.com/t/bypass-notecard-edge-connector/581/1 "2021-12-30T01:47:24Z")

</div>

I’m wondering if there is a way to bypass the edge connector on the notecard. I’d like to interface with it without having to use that huge note carrier board and I don’t want to design my own mcu board with the edge connector on it. It looks like there are some circular pads near the edge connector ? Do they connect to the pins on the edge connector ?

---

<div class="post-metadata">

**Author:** ![RobLauer](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/roblauer/32/1567_2.png) [@RobLauer](https://discuss.blues.com/u/RobLauer)\
**Post date:** [December 30, 2021, 11:24pm UTC](https://discuss.blues.com/t/bypass-notecard-edge-connector/581/2 "2021-12-30T23:24:37Z")

</div>

Hi @tavis ,

I don’t have a direct answer for you just yet, but the scenario you described could potentially be addressed with the small form-factor [Notecarrier-B](https://blues.io/products/notecarrier/notecarrier-b/) in case you haven’t seen that.

Thanks,  
Rob
