# CAD Model for Hardware

**URL:** <https://discuss.blues.com/t/cad-model-for-hardware/721>\
**Category:** Hardware\
**Created:** [March 6, 2022, 5:08pm UTC](https://discuss.blues.com/t/cad-model-for-hardware/721 "2022-03-06T17:08:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Block](https://avatars.discourse-cdn.com/v4/letter/b/839c29/32.png) [@Block](https://discuss.blues.com/u/Block)\
**Post date:** [March 6, 2022, 5:08pm UTC](https://discuss.blues.com/t/cad-model-for-hardware/721/1 "2022-03-06T17:08:22Z")

</div>

Hi Blues,

Do you have any CAD models for the notehub PCB to use for building an enclosure? Any commonly used format is fine.

Best,  
Nate

---

<div class="post-metadata">

**Author:** ![bsatrom](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/bsatrom/32/3_2.png) [@bsatrom](https://discuss.blues.com/u/bsatrom)\
**Post date:** [March 6, 2022, 6:12pm UTC](https://discuss.blues.com/t/cad-model-for-hardware/721/2 "2022-03-06T18:12:32Z")

</div>

Hey @Block all of the design files for our Notecarriers can be found in the [note-hardware repo](https://github.com/blues/note-hardware).

I hope that helps!

Brandon