# Host Firmware Update (Notehub -\>Notecard)

**URL:** <https://discuss.blues.com/t/host-firmware-update-notehub-notecard/530>\
**Category:** Notehub.io\
**Created:** [December 6, 2021, 2:44pm UTC](https://discuss.blues.com/t/host-firmware-update-notehub-notecard/530 "2021-12-06T14:44:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![richf](https://avatars.discourse-cdn.com/v4/letter/r/74df32/32.png) [@richf](https://discuss.blues.com/u/richf)\
**Post date:** [December 6, 2021, 2:44pm UTC](https://discuss.blues.com/t/host-firmware-update-notehub-notecard/530/1 "2021-12-06T14:44:48Z")

</div>

This issue is similar to that reported on Aug 24 of this year –

After successfully uploading a “firmware image” to the Notehub, I’m unable to download that image to the Notecard – The status on the Devices page continually shows downloading status of “0%” … which never changes. Events page shows up-to-date Notecard/Notehub communication.

Thanks, Rich …

---

<div class="post-metadata">

**Author:** ![richf](https://avatars.discourse-cdn.com/v4/letter/r/74df32/32.png) [@richf](https://discuss.blues.com/u/richf)\
**Post date:** [December 9, 2021, 2:02pm UTC](https://discuss.blues.com/t/host-firmware-update-notehub-notecard/530/2 "2021-12-09T14:02:25Z")

</div>

It appears that the hub ‘mode’ must be set to “ **continuous** ” to perform the Notehub -\>Notecard transfer. My setting was “minimal” to reduce power requirement – once placed into “continuous” mode the transfer succeeded.