# IIS3DWB accelerometer with SWAN

**URL:** <https://discuss.blues.com/t/iis3dwb-accelerometer-with-swan/1732>\
**Category:** Firmware\
**Created:** [October 15, 2023, 6:29pm UTC](https://discuss.blues.com/t/iis3dwb-accelerometer-with-swan/1732 "2023-10-15T18:29:18Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![iarakis](https://avatars.discourse-cdn.com/v4/letter/i/7c8e57/32.png) [@iarakis](https://discuss.blues.com/u/iarakis)\
**Post date:** [October 15, 2023, 6:29pm UTC](https://discuss.blues.com/t/iis3dwb-accelerometer-with-swan/1732/1 "2023-10-15T18:29:18Z")

</div>

Hi,

Can someone help to run this code for STM32L476 on SWAN?

> **[GitHub - kriswiner/IIS3DWB: Arduino sketches for ST's IIS3DWB vibration...](https://github.com/kriswiner/IIS3DWB)**
>
> Arduino sketches for ST's IIS3DWB vibration analyzer accelerometer - GitHub - kriswiner/IIS3DWB: Arduino sketches for ST's IIS3DWB vibration analyzer accelerometer

Regards,

---

<div class="post-metadata">

**Author:** ![tsuzenski](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/tsuzenski/32/847_2.png) [@tsuzenski](https://discuss.blues.com/u/tsuzenski)\
**Post date:** [October 16, 2023, 4:26pm UTC](https://discuss.blues.com/t/iis3dwb-accelerometer-with-swan/1732/2 "2023-10-16T16:26:31Z")

</div>

Hi,

I am using the same accelerometer with the swan as you are, except I was not able to get that library to work. Just wanted to offer an alternative – I used this library instead: [GitHub - stm32duino/ISM330DHCX: Arduino library to support the ISM330DHCX 3D accelerometer and 3D gyroscope](https://github.com/stm32duino/ISM330DHCX)

Except I ignored the gyroscope part.

---

<div class="post-metadata">

**Author:** ![iarakis](https://avatars.discourse-cdn.com/v4/letter/i/7c8e57/32.png) [@iarakis](https://discuss.blues.com/u/iarakis)\
**Post date:** [October 17, 2023, 6:16am UTC](https://discuss.blues.com/t/iis3dwb-accelerometer-with-swan/1732/3 "2023-10-17T06:16:51Z")

</div>

Thanks! This library works also for IIS3DWB?

---

<div class="post-metadata">

**Author:** ![tsuzenski](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/tsuzenski/32/847_2.png) [@tsuzenski](https://discuss.blues.com/u/tsuzenski)\
**Post date:** [October 17, 2023, 12:51pm UTC](https://discuss.blues.com/t/iis3dwb-accelerometer-with-swan/1732/4 "2023-10-17T12:51:23Z")

</div>

Yes, I got this library to work with the STEVAL-MKI208V1K iNemo Inertial Module Kit that has a pre-mounted IIS3DWB accelerometer.

---

<div class="post-metadata">

**Author:** ![iarakis](https://avatars.discourse-cdn.com/v4/letter/i/7c8e57/32.png) [@iarakis](https://discuss.blues.com/u/iarakis)\
**Post date:** [October 17, 2023, 2:19pm UTC](https://discuss.blues.com/t/iis3dwb-accelerometer-with-swan/1732/5 "2023-10-17T14:19:27Z")

</div>

That is also my setup. I want to use it for structural health monitoring. Can we discuss it? My email is: [iarakis@kaixo.com](mailto:iarakis@kaixo.com)

Regards,

 ![Imagen de WhatsApp 2023-10-17 a las 16.17.43_8e7f9b7e](https://us1.discourse-cdn.com/flex020/uploads/blues/original/1X/bc0d8498942f97f297518e0fcd2e8713b81493a3.jpeg)