# Is my Notecard broken or my Raspberry Pico

**URL:** <https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913>\
**Category:** Hardware\
**Tags:** python\
**Created:** [July 25, 2022, 2:06am UTC](https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913 "2022-07-25T02:06:17Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![tempneff](https://avatars.discourse-cdn.com/v4/letter/t/8baadc/32.png) [@tempneff](https://discuss.blues.com/u/tempneff)\
**Post date:** [July 25, 2022, 2:06am UTC](https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913/1 "2022-07-25T02:06:17Z")

</div>

I’m using a Notecarrier-A, Notecard, and Raspberry Pico. My system worked fine for some initial trials using this [youtube guide](https://www.youtube.com/watch?v=rxq9vc1sW_0&ab_channel=BluesWireless) . Then after shuffling things around the workbench, the pi can’t see the notecard anymore. When I scan for I2C I can sporadically find the device. Certainly, one of the components has been damaged.

Is there a way to verify that the Notecard and the Notecarrier are working properly on the Notecard In-Browser terminal?

---

<div class="post-metadata">

**Author:** ![RobLauer](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/roblauer/32/1567_2.png) [@RobLauer](https://discuss.blues.com/u/RobLauer)\
**Post date:** [July 26, 2022, 12:47pm UTC](https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913/2 "2022-07-26T12:47:03Z")

</div>

Hi @tempneff and welcome to the Blues Wireless community!

A good first step would be to connect just the Notecarrier (with the Notecard seated on it) to the in-browser terminal at [dev.blues.io](http://dev.blues.io). If you can connect and issue a basic request (something like `card.version`) successfully, it’s likely the Notecard is just fine.

Rob

---

<div class="post-metadata">

**Author:** ![tempneff](https://avatars.discourse-cdn.com/v4/letter/t/8baadc/32.png) [@tempneff](https://discuss.blues.com/u/tempneff)\
**Post date:** [July 26, 2022, 1:11pm UTC](https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913/3 "2022-07-26T13:11:05Z")

</div>

Thanks Rob,

Looks like it is fine.

David

---

<div class="post-metadata">

**Author:** ![tempneff](https://avatars.discourse-cdn.com/v4/letter/t/8baadc/32.png) [@tempneff](https://discuss.blues.com/u/tempneff)\
**Post date:** [July 27, 2022, 4:20am UTC](https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913/4 "2022-07-27T04:20:11Z")

</div>

Hi again Rob,

Despite this USB test I am unable to connect by SDA and SCL anymore. I have now tried 3 different Raspberry Pi Picos. Is there a way to test these pins on the NoteCarrier?

---

<div class="post-metadata">

**Author:** ![RobLauer](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/roblauer/32/1567_2.png) [@RobLauer](https://discuss.blues.com/u/RobLauer)\
**Post date:** [July 27, 2022, 3:46pm UTC](https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913/5 "2022-07-27T15:46:32Z")

</div>

Sure - there are a few things I would suggest:

1. Use a simple [I2C scanner sketch](https://playground.arduino.cc/Main/I2cScanner/) or [this one for MicroPython](https://gist.github.com/projetsdiy/f4330be62589ab9b3da1a4eacc6b6b1c) to see if the Notecard shows up after a scan.
2. You can use a basic hardware [I2C bus scanner too](https://i2cdriver.com/). I’ve had luck with that one.
3. Send a picture here as well of your setup and we can inspect the wiring just to make sure it all looks good.

Thanks,  
Rob

---

<div class="post-metadata">

**Author:** ![ujur007](https://avatars.discourse-cdn.com/v4/letter/u/e9bcb4/32.png) [@ujur007](https://discuss.blues.com/u/ujur007)\
**Post date:** [July 28, 2022, 4:34pm UTC](https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913/6 "2022-07-28T16:34:07Z")

</div>

Just a litter suggestion…  
I had problems with I2C communication in the past, and latter found out that the wires I used had corrosion effect. So make sure there is no such thing in your connections.

---

<div class="post-metadata">

**Author:** ![tempneff](https://avatars.discourse-cdn.com/v4/letter/t/8baadc/32.png) [@tempneff](https://discuss.blues.com/u/tempneff)\
**Post date:** [July 31, 2022, 11:52pm UTC](https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913/7 "2022-07-31T23:52:09Z")

</div>

Thanks again,

I found that If I power it through the 3.3v output in the pico, it doesn’t recognize i2c. BUT, I can get them to talk if I power from the 5v Vbus on the pico.

Is that normal?

---

<div class="post-metadata">

**Author:** ![RobLauer](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/roblauer/32/1567_2.png) [@RobLauer](https://discuss.blues.com/u/RobLauer)\
**Post date:** [August 1, 2022, 2:55pm UTC](https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913/8 "2022-08-01T14:55:02Z")

</div>

Hi @tempneff,

That hasn’t been my experience with the Pico. You’re using the Notecarrier-A, correct? And what are you using to power the Notecarrier and Pico (what’s the voltage input)? Again a picture of your setup might be helpful in this case, just to double check.

Thanks,  
Rob

---

<div class="post-metadata">

**Author:** ![tempneff](https://avatars.discourse-cdn.com/v4/letter/t/8baadc/32.png) [@tempneff](https://discuss.blues.com/u/tempneff)\
**Post date:** [August 2, 2022, 3:37am UTC](https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913/9 "2022-08-02T03:37:28Z")

</div>

Well…I guess it just needed the encouragement…I can’t replicate the problem anymore. Here is my setup anyway…thanks for your help.

 ![PXL_20220802_033526273](https://us1.discourse-cdn.com/flex020/uploads/blues/original/1X/888474b88c71bc4c66caaece1e633ccff99a60c2.jpeg)  
 ![PXL_20220802_033517072](https://us1.discourse-cdn.com/flex020/uploads/blues/original/1X/0f0a2635354b5155c63e181141345124c3d42b9e.jpeg)  
 ![PXL_20220802_033506907](https://us1.discourse-cdn.com/flex020/uploads/blues/original/1X/7f92921ed1cbcffa23fce100c6ff9e501b356269.jpeg)

---

<div class="post-metadata">

**Author:** ![RobLauer](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/roblauer/32/1567_2.png) [@RobLauer](https://discuss.blues.com/u/RobLauer)\
**Post date:** [August 2, 2022, 2:01pm UTC](https://discuss.blues.com/t/is-my-notecard-broken-or-my-raspberry-pico/913/10 "2022-08-02T14:01:05Z")

</div>

It’s like taking your car into the shop and it doesn’t make the same noise. Very frustrating! Please let us know if you experience the issue again.

From your pictures we did notice the location of the Pulse antennas may cause an issue. The antennas need a 12mm diameter “metal-free” cylinder surrounding the core of the antenna. Since breadboards are full of metal contacts, you may have a hard time with getting a cell signal with the antenna sitting on the breadboard. I would let the two antennas hang free over the edge of the breadboard by a significant amount.

Thanks,  
Rob
