# Making a pcb to plug in the notecarrier x - need the footprint symbol

**URL:** <https://discuss.blues.com/t/making-a-pcb-to-plug-in-the-notecarrier-x-need-the-footprint-symbol/3635>\
**Category:** Notecarrier X\
**Created:** [September 15, 2026, 3:32pm UTC](https://discuss.blues.com/t/making-a-pcb-to-plug-in-the-notecarrier-x-need-the-footprint-symbol/3635 "2026-09-15T15:32:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jimbooth97](https://avatars.discourse-cdn.com/v4/letter/j/c89c15/32.png) [@jimbooth97](https://discuss.blues.com/u/jimbooth97)\
**Post date:** [September 15, 2026, 3:32pm UTC](https://discuss.blues.com/t/making-a-pcb-to-plug-in-the-notecarrier-x-need-the-footprint-symbol/3635/1 "2026-09-15T15:32:48Z")

</div>

Trying to make a pcb and i can’t find the card on easyEda. i am using the notecarrier x. which happens to be cell and wifi. anyone got any ideas on where to find it?

---

<div class="post-metadata">

**Author:** ![RobLauer](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/roblauer/32/1567_2.png) [@RobLauer](https://discuss.blues.com/u/RobLauer)\
**Post date:** [September 15, 2026, 4:03pm UTC](https://discuss.blues.com/t/making-a-pcb-to-plug-in-the-notecarrier-x-need-the-footprint-symbol/3635/2 "2026-09-15T16:03:26Z")

</div>

Hi @jimbooth97 and welcome to the Blues community!

All of our Notecarrier design files are open source and available here:

> **[GitHub - blues/note-hardware](https://github.com/blues/note-hardware)**
>
> Contribute to blues/note-hardware development by creating an account on GitHub.

Thanks,  
Rob