# Power sequencing

**URL:** <https://discuss.blues.com/t/power-sequencing/451>\
**Category:** Hardware\
**Created:** [October 11, 2021, 6:36pm UTC](https://discuss.blues.com/t/power-sequencing/451 "2021-10-11T18:36:53Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tom](https://avatars.discourse-cdn.com/v4/letter/t/3d9bf3/32.png) [@Tom](https://discuss.blues.com/u/Tom)\
**Post date:** [October 11, 2021, 6:36pm UTC](https://discuss.blues.com/t/power-sequencing/451/1 "2021-10-11T18:36:53Z")

</div>

So, you have VIO, Vmodem and VUSB. What, if any, are the sequence requirements for bringing these up? Can it be in any order? Does VUSB need to be powered at all?

---

<div class="post-metadata">

**Author:** ![RobLauer](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/roblauer/32/1567_2.png) [@RobLauer](https://discuss.blues.com/u/RobLauer)\
**Post date:** [October 11, 2021, 8:25pm UTC](https://discuss.blues.com/t/power-sequencing/451/2 "2021-10-11T20:25:49Z")

</div>

Hi @Tom,

VUSB does not need to be powered. There are also no requirements on the ordering of VIO/VMODEM/VSB as long as they are brought up within a few seconds of one another.

To be even more specific:

- If VMODEM is brought up first (or they are brought up at the same time), there will never be any confusion.
- If VIO is brought up first and VMODEM isn’t present when the STM32 turns on the modem, it will try a hard-reset, but will eventually work fine when VMODEM is powered.

In no case will there ever be any hardware damage or other such issue to worry about.

Thanks,  
Rob

---

<div class="post-metadata">

**Author:** ![Tom](https://avatars.discourse-cdn.com/v4/letter/t/3d9bf3/32.png) [@Tom](https://discuss.blues.com/u/Tom)\
**Post date:** [October 11, 2021, 9:55pm UTC](https://discuss.blues.com/t/power-sequencing/451/3 "2021-10-11T21:55:21Z")

</div>

Beauty. This has been a really aggravating issue with some hardware.

---

<div class="post-metadata">

**Author:** ![ktowers](https://avatars.discourse-cdn.com/v4/letter/k/ee59a6/32.png) [@ktowers](https://discuss.blues.com/u/ktowers)\
**Post date:** [December 15, 2022, 6:19pm UTC](https://discuss.blues.com/t/power-sequencing/451/4 "2022-12-15T18:19:50Z")

</div>

To follow up on this question, is there a minimum rise time for either of the power supply lines (VIO or VMODEM)?

I want to use a supercap to handle the current surges on VMODEM, but its voltage will ramp slowly during initial power on.
