# Probem with mlops-zephyr demo

**URL:** <https://discuss.blues.com/t/probem-with-mlops-zephyr-demo/2075>\
**Category:** Firmware\
**Created:** [April 17, 2024, 10:12pm UTC](https://discuss.blues.com/t/probem-with-mlops-zephyr-demo/2075 "2024-04-17T22:12:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Embedded\_iceman](https://avatars.discourse-cdn.com/v4/letter/e/a698b9/32.png) [@Embedded\_iceman](https://discuss.blues.com/u/Embedded_iceman)\
**Post date:** [April 17, 2024, 10:12pm UTC](https://discuss.blues.com/t/probem-with-mlops-zephyr-demo/2075/1 "2024-04-17T22:12:36Z")

</div>

Hi,

For starters, I am playing around with mlops-zephyr. I have modified the demo to collect temperature and humidity readings instead of accelaration data, other than that I am have not changed much, I think.

in this section of the code

```auto
        // Send binary data to the Notecard
        NoteBinaryStoreReset();
        if(NoteBinaryStoreTransmit((uint8_t *)buffer,
                                (EI_CLASSIFIER_DSP_INPUT_FRAME_SIZE * sizeof(float)),
                                (EI_CLASSIFIER_DSP_INPUT_FRAME_SIZE_COBS * sizeof(float)),
                                0) != NULL)
        {
            printk("NoteBinaryStoreTransmit failed");
        }
        J *req = NoteNewRequest("web.post");
        if (req)
        {
            JAddStringToObject(req, "route", "ingest");
            JAddStringToObject(req, "content", "binary/octet-stream");
            JAddBoolToObject(req, "binary", true);
            if (!NoteRequest(req))
            {
                printk("Failed to submit Note to Notecard.\n");
                ret = -1;
                break;
            }
        }

```

it fails at NoteRequest with this at the console

[INFO] {“req”:“card.binary”,“delete”:true,“crc”:“0002:A95AF583”}  
[INFO] {“max”:261110}  
[INFO] {“req”:“card.binary”,“crc”:“0003:21904900”}  
[INFO] {“max”:261110}  
[INFO] {“req”:“card.binary.put”,“cobs”:81,“status”:“d601993fa817aaa11efaf664e82cc609”,“crc”:“0004:80F841D4”}  
[INFO] {}  
[INFO] {“req”:“card.binary”,“crc”:“0005:21904900”}  
[INFO] {“max”:261110,“status”:“d601993fa817aaa11efaf664e82cc609”,“length”:80,“cobs”:81}  
[INFO] {“req”:“web.post”,“route”:“ingest”,“content”:“binary/octet-stream”,“binary”:true,“crc”:“0006:5B6CFB51”}  
[INFO] {**“err”:“file is too large (103633 larger than 100000 max)”}**

I am just attempting to transmit10 sample stores for now to see data routed to my edge impulse project. Why is it telling me that the binary file is too large ?

Here is some more critical code for reference

```auto
#define EI_CLASSIFIER_RAW_SAMPLE_COUNT (10)
#define EI_CLASSIFIER_RAW_SAMPLES_PER_FRAME 2
#define EI_CLASSIFIER_DSP_INPUT_FRAME_SIZE (EI_CLASSIFIER_RAW_SAMPLE_COUNT * EI_CLASSIFIER_RAW_SAMPLES_PER_FRAME)
#define EI_CLASSIFIER_INTERVAL_MS (100.0) // 1.314060446780552
#define EI_CLASSIFIER_DSP_INPUT_FRAME_SIZE_COBS (EI_CLASSIFIER_DSP_INPUT_FRAME_SIZE + 256)
...
//for loop that collects the data in buffer, collecting 2 readings per iteration, changed end condition for that
for (size_t ix = 0; ix < (EI_CLASSIFIER_DSP_INPUT_FRAME_SIZE - 1);
             ix += EI_CLASSIFIER_RAW_SAMPLES_PER_FRAME)
        {

```

---

<div class="post-metadata">

**Author:** ![RobLauer](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/roblauer/32/1567_2.png) [@RobLauer](https://discuss.blues.com/u/RobLauer)\
**Post date:** [April 18, 2024, 2:42pm UTC](https://discuss.blues.com/t/probem-with-mlops-zephyr-demo/2075/2 "2024-04-18T14:42:34Z")

</div>

Hi @Embedded_iceman,

It’s been a minute since I was deep into the card.binary APIs, but I believe what’s happening is you are trying to store more data in the “reserved” space on the Notecard than is available. [This guide](https://dev.blues.io/guides-and-tutorials/notecard-guides/sending-and-receiving-large-binary-objects/) is a good place to start and making sure that you’re following the conventions required.

Rob