# Updating Notecard (LoRa) firmware using STM32CubeProgrammer

**URL:** <https://discuss.blues.com/t/updating-notecard-lora-firmware-using-stm32cubeprogrammer/3167>\
**Category:** Uncategorized\
**Tags:** firmware-release\
**Created:** [July 17, 2025, 11:31am UTC](https://discuss.blues.com/t/updating-notecard-lora-firmware-using-stm32cubeprogrammer/3167 "2025-07-17T11:31:41Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Youssif](https://avatars.discourse-cdn.com/v4/letter/y/c57346/32.png) [@Youssif](https://discuss.blues.com/u/Youssif)\
**Post date:** [July 17, 2025, 12:27pm UTC](https://discuss.blues.com/t/updating-notecard-lora-firmware-using-stm32cubeprogrammer/3167/2 "2025-07-17T12:27:51Z")

</div>

Hi Chris

On Windows, you wouldn’t see a device with the tty.usbserial-xxxxx format, that’s typical for Linux/macOS. Instead, the Notecard should appear as a COM port in Device Manager, similar to the COM3 device you mentioned.

Can you please confirm whether the LoRa Notecard shows up in **Device Manager** when it’s in bootloader mode? Also, just to double-check, are you following the steps in the guide linked below?

[DFU with STM32CubeProgrammer](https://dev.blues.io/notecard/notecard-walkthrough/updating-notecard-firmware/#dfu-with-stm32cubeprogrammer)

Out of curiosity, which firmware version is your LoRa Notecard currently running? If it’s on version 7.4.2 or later, you can update it directly using the [in-browser terminal](https://dev.blues.io/terminal/) with the **firmware install** command. For example:

> firmware install notecard-wl-8.2.1

If it’s on an earlier version, please share the firmware version and any other details so that I can try to reproduce the setup on my end.

Below are some links to what other users have tried already:-

- [Updating firmware on LoRa Notecard](https://discuss.blues.com/t/updating-firmware-on-lora-card/2411)
- [DFU with STM32CubeProgrammer Fails](https://discuss.blues.com/t/dfu-with-stm32cubeprogrammer-fails/2199)

Thanks  
Youssif

---

_[View the full topic](https://discuss.blues.com/t/updating-notecard-lora-firmware-using-stm32cubeprogrammer/3167)._
