# VMODEM power requirements

**URL:** <https://discuss.blues.com/t/vmodem-power-requirements/1217>\
**Category:** Hardware\
**Created:** [January 30, 2023, 7:14pm UTC](https://discuss.blues.com/t/vmodem-power-requirements/1217 "2023-01-30T19:14:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ktowers](https://avatars.discourse-cdn.com/v4/letter/k/ee59a6/32.png) [@ktowers](https://discuss.blues.com/u/ktowers)\
**Post date:** [January 30, 2023, 7:14pm UTC](https://discuss.blues.com/t/vmodem-power-requirements/1217/1 "2023-01-30T19:14:50Z")

</div>

Your document application note [document](https://dev.blues.io/hardware/application-notes/notecard-host-system-design-guide/#m-2-connector) states that VMODEM has a supply range of 2.5V to 5.5V and will draw 2A bursts. Can you tell me at what voltage this 2A is measured? There is a big difference in supply design if this 2A is at 5.5V or 2.5V.

Thanks

Kevin

---

<div class="post-metadata">

**Author:** ![RobLauer](https://sea2.discourse-cdn.com/flex020/user_avatar/discuss.blues.com/roblauer/32/1567_2.png) [@RobLauer](https://discuss.blues.com/u/RobLauer)\
**Post date:** [January 30, 2023, 8:50pm UTC](https://discuss.blues.com/t/vmodem-power-requirements/1217/2 "2023-01-30T20:50:02Z")

</div>

Hi @ktowers,

It’s measured at 3.8V - so the actual requirement is approximately 7.5 watts. Please note that there is no need for 7.5 watts on a continuous basis as these bursts are quite short (e.g. when the modem is powered-on and upon the first transmit), and we suggest that you use a Joulescope or equivalent to watch the actual behavior. The bursts are most severe if you are using GSM, and are only about 1.2A if you are using Cat-1, Cat-M, or NB-IoT. There is also a significant bank of capacitance on the Notecard to try to buffer the need of these pulses.

Hope that helps!  
Rob
