I have taken off all peripherals (the swan and 3 wire sensor) and have followed the setup instructions in the quickstart tutorial. Here are the steps I took:
1: Connect QWIC Connector to MoJo and innermost port of notecarrier F
2: Connect High Pulse Tadiran to MoJo
3: Connect MoJo VOUT to V+ terminal of Notecarrier F
4: Connect laptop USB cable to Notecarrier F for simulator
5: Send power request to Notecarrier from terminal
Output of request:
> {"req":"card.power"}
{
"err": "you have no mojo {no-mojo}",
"milliamp_hours": 9.156833399999998
}
I have moved back Feather_EN to the on position during testing