Hmmmm,
Ok, let’s back up a little. Can you send me a list of the Notecard commands you’re running to set up your project?
For my own testing I factory reset a Notecard WiFi, and then ran the following commands:
{"req":"hub.set","product":"com.blues.tvantoll:test","mode":"periodic","inbound":60,"outbound":10}
{"req":"card.temp","minutes":5}
{"req":"card.location.mode","mode":"continuous"}
I then hooked up a LiPo battery, set the device outside and let it sit for a bit, and then confirmed my Notes had a tagged GPS location.
TJ