In browser terminal trace diagnostics won't stop

Tools & SDKs
1

Hi, for some reason, the ‘in-browser’ terminal won’t stop its diagnostic output (see below). I tried issuing {“req”:“card.trace”,“mode”:“off”} with no luck. Hardware platform is the “Startnote for Iridium”. I also temporarily removed the Iridium module from the notecarrier – same result. Does the notecard need to be reset?

regards, Rich ..

R06:45.31 000.104 file.c:1956 G06:45.34 000.080 gps.c:1508 gps: continuous periodSecs:0 wakeDueMs:86400000 motionEvents:0, refresh:1
G06:45.51 000.102 gps.c:1528 heartbeat: periodSecs:600 wakeDueMs:0
G06:45.58 File: completed read of file:data/_health-qo.json 315 in 3 ms
R06:45.60 000.062 gps.c:1557 gps-task: FAST POLLING (heartbeat 1s)
000.-01 notebox.c:2512 after openfile reading file:data/_health-qo.json (20) into memory, open refcnt now 1
R06:45.76 000.117 notebox.c:2639 after closefile of file:data/_health-qo.json (20), close refcnt now 0
R06:45.87 000.104 file.c:1956 File: completed read of file:data/_log-qo.json 28 in 1 ms
R06:45.97 000.087 notebox.c:2512 after openfile reading file:data/_log-qo.json (0) into memory, open refcnt now 1
R06:46.09 000.113 notebox.c:2639 after closefile of file:data/_log-qo.json (0), close refcnt now 0
G06:46.12 000.085 gps.c:1508 S06:46.20 000.012 << gps: continuous periodSecs:0 wakeDueMs:86400000 motionEvents:0, refresh:1
G06:46.38 000.166 gps.c:1528 heartbeat: periodSecs:600 wakeDueMs:0
notebox.c:863 {“id”:2000000069,“status”:“upload-notebox (35 changes) {sync-get-local-changes}”,“mode”:“{network-up}”,“sync”:true,“requested”:227}
_track.qo file:data/_track-qo.json (0) will be removed from memory, forced purge
S06:46.54 000.150 notebox.c:863 G06:46.45 000.098 gps.c:1557 gps-task: FAST POLLING (heartbeat 1s)
sat1.qo file:data/sat1-qo.json (0) will be removed from memory, forced purge
S06:46.71 000.063 notebox.c:863 track5.qo file:data/track5-qo.json (0) will be removed from memory, forced purge
S06:46.83 000.112 notebox.c:863 my-inbound.qi file:data/my-inbound-qi.json (0) will be removed from memory, forced purge

2

Hi @richf,

{"req":"card.trace","mode":"off"} only turns off a temporary trace session. It doesn’t touch other saved trace options, and one of those options, usb, sends trace to USB no matter what. Is there any chance you ran trace all in the In-Browser Terminal? That turns on every option, usb included, and that one is saved across restarts.

In any case, these two commands set it back to the default behavior:

trace none,+comm,+mem,+sync,+gps
trace off

Hope that helps!
Rob