Integration of low power cellular connectivity with Blynk

Hardware
1

Hello,

I recently went through blog post on blynk’s integration with blues low power cellular connectivity. I am currently using an wifi source for the connection of our current IOT device, and very often we experience connection issues. So, have any one already used this integration? what hardware from Blues do we need for this integration?

Note: I am using Atom Lite ESP32 hardware.
Thank you so much for the responses.

Thanks,
Sachin

2

If you still want to use WiFi you can use the Blues WiFi notecard

3

Hi @SachinGowda and welcome to the Blues community!

As @Pius4109 mentioned, you can certainly use the Notecard WiFi, but frankly any of our Notecards (cellular, lora, wi-fi) will work fine with that ESP32 host. We do offer a starter kit, but you could also get started with a Notecarrier A to connect to your host, along with any Notecard.

Rob

1 Like
4

Hi @RobLauer Thank you so much for the response. I went through the above mentioned hardware kits. I will order notecard wifi and notecarrier A, for now to test that with our ESP32 atom lite controller.
Do we have any support/docus etc for integration of Blues hardware to our controller?

Thanks
Sachin

5

Hi @SachinGowda,

We do have a variety of tutorials available on our developer site on blues.dev. One in particular that may be useful for you is our sensor tutorial.

Rob